Elimination of persistent organic pollutants from fish oil with solid adsorbents

Fish oils are one of the main sources of ω-3 fatty acids in animal and human diet. However, they can contain high concentrations of persistent organic pollutants due to their lipophilic properties. The aim of this study is the reduction of persistent organic pollutants in fish oil using silicon-based and carbon-based solid adsorbents. A wide screening study with different commercially available adsorbents was carried out, in order to determine their capacity of pollutant removal from fish oil. Moreover, adsorption conditions were evaluated and optimized with using an experimental design and adjustment of the experimental results to response surfaces, obtaining removals rates of more than 99% of PCDD/Fs, 81% of dioxin-like PCBs, 70% of HCB, 41% of DDTs, 16% of marker PCBs and 10% of PBDEs. Finally, fish oil fatty acids were analyzed before and after the treatment with solid adsorbents, confirming that it did not affect its nutritive properties.     

Effects of previous sublethal pulse to ammonium nitrate on mortality and total length on Epidalea calamita larvae

Ammonium nitrate is one of the most widespread contaminants related with the viability of natural amphibian populations. In this study we have evaluated in terms of mortality and total length the effects that a previous sublethal pulse to ammonium nitrate generates in Epidalea calamita. Experiments were divided in two phases. In the first one, tadpoles were exposed to two different treatments, with and without a low ammonium nitrate concentration (22 mg NH₄NO₃ L⁻¹). The second phase consisted in static toxicity experiments from both origin treatments with five different nominal concentrations (0, 22, 45, 90 and 180 mg NH₄NO₃ L⁻¹). Results showed that tadpoles that had experienced a previous sublethal exposure showed a negative effect on survival (57% of reduction in the LC₅₀ value) and total length, throughout an increase in their sensitivity. These results could help us to understand the situation of amphibian populations inhabiting aquatic ecosystems exposed to discontinuous and variable pulses of pollutants.     

Aerobic biodegradation of linear alkylbenzene sulfonates and sulfophenylcarboxylic acids for different salinity values by means of continuous assays

Aerobic biodegradation of linear alkylbenzene sulfonates (LAS) and sulfophenylcarboxylic acids (SPCs) in water, at different salinity values, has been studied. Three experiments have been carried out employing a staircase model system with continuous dosage of LAS to the system and using concentrations of LAS of the same order as those detected in littoral waters receiving urban wastewater discharges. LAS biodegradation was observed to be almost complete (showing a great extent), and in all cases exceeds 98.4%. At the very low concentration values of LAS utilized in the experiments, no significant variations in the biodegradation of LAS due to the effect of the different salinity values assayed were observed. The biodegradation intermediates detected for all the cases were sulfophenylcarboxylic acids with carboxylic chains of between five and 13 carbon atoms. The detection of C13-SPC (which is only produced by C13-LAS) confirms the existence of ω-oxidation. The total disappearance of SPCs in all cases indicates that mineralization of LAS at the concentrations tested was complete.     

Environmental strategy and performance in small firms: a resource-based perspective

In spite of the widespread recognition of the important roles that small and medium sized enterprises (SMEs) play in most economies, limited research has focused on their impacts on the natural environment and the strategies such enterprises adopt to reduce these impacts. It is usually assumed that SMEs lack the resources to implement proactive environmental strategies that go beyond minimum regulatory compliance. In this study of 108 SMEs in the automotive repair sector in Southern Spain, we found that SMEs undertake a range of environmental strategies from reactive regulatory compliance to proactive pollution prevention and environmental leadership. These strategies are associated with three organizational capabilities: shared vision, stakeholder management, and strategic proactivity, hypothesized based on the unique strategic characteristics of SMEs--shorter lines of communication and closer interaction within the SMEs, the presence of a founder's vision, flexibility in managing external relationships, and an entrepreneurial orientation. We also found that firms with the most proactive practices exhibited a significantly positive financial performance.     

Ecotoxicity and fungal deterioration of recycled polypropylene/wood composites: Effect of wood content and coupling

Recycled polypropylene (rPP) was recovered from an industrial shredder and composites were prepared with a relatively wide range of wood content and with two coupling agents, a maleated PP (MAPP) and a maleated ethylene-propylene-diene elastomer (MAEPDM). The mechanical properties of the composites showed that the coupling agents change structure only slightly, but interfacial adhesion quite drastically. The durability of the materials was determined by exposing them to a range of fungi and, ecotoxicity was studied on the aquatic organism Vibrio fischeri. The composites generally exhibit low acute toxicity, with values below the levels considered to have direct ecotoxic effect on aquatic ecosystems (<2 toxic units). Their toxicity to V. fischeri depended on the presence of the coupling agents with larger E₅₀ values in 24-h aqueous extracts from composites containing MAPP or MAEPDM in comparison to composites without any coupling agent. Evaluation of resistance against fungal colonization and deterioration proved that wood facilitates fungal colonization. Fungi caused slight mass loss (below 3%) but it was not correlated with substantial deterioration in material properties. MAPP seems to be beneficial in the retention of mechanical properties during fungal attack. rPP/wood composites can be considered non-ecotoxic and quite durable, but the influence of wood content on resistance to fungal attack must be taken into account for materials intended for applications requiring long-term outdoor exposure.     

The influence of a voluntary fee in the consumption of plastic bags on supermarkets from Madeira Island (Portugal)

Since 2007, some supermarkets in Portugal have voluntarily abolished the free distribution of plastic bags, implementing a symbolic charge of €0.02 each at the same time that others still offer free plastic bags. This study assesses the influence of this voluntary measure on the reduction of plastic bags consumption, comparing clients from supermarkets that have adopted it with others who have free distribution. The reutilisation of bags reached 37% in supermarkets where customers pay a fee and was absent in supermarkets where plastic bags are free. Even the abstention of using bags, when clients buy only few products, is significantly higher in supermarkets where there are charges for plastic bags. The 2 cents charged has also induced a significant increase in optimal use of plastic bags since 52% of clients that pay for plastic bags use them so they are almost full, but only 17% do the same when they are free. Taken together, the different effects of charging for plastic bags represents a potential reduction of 64%. A mandatory tax on plastic bags is an important measure to reduce substantially the number of plastic bags consumed and to improve sustainability through the reduction of environmental, economic and social costs of pollution and waste management.     

High fire resistance in blocks containing coal combustion fly ashes and bottom ash

Fire resistance recycled blocks, containing fly ash and bottom ash from coal combustion power plants with a high fire resistance, are studied in this paper by testing different compositions using Portland cement type II, sand, coarse aggregate and fly ash (up to 50% of total weight) and bottom ash (up to 30% of total weight). The fire resistance, physical-chemical (density, pH, humidity, and water absorption capacity), mechanical (compressive and flexural strength), and leaching properties are measured on blocks made with different proportions of fly ash and bottom ash. The standard fire resistance test is reproduced on 28 cm-high, 18 cm-wide and 3 cm-thick units, and is measured as the time needed to reach a temperature of 180 °C on the non-exposed surface of the blocks for the different compositions.The results show that the replacement of fine aggregate with fly ash and of coarse aggregate with bottom ash have a remarkable influence on fire resistance and cause no detriment to the mechanical properties of the product. Additionally, according to the leaching tests, no environmental problems have been detected in the product. These results lead to an analysis of the recycling possibilities of these by-products in useful construction applications for the passive protection against fire.     

Determination of spatially-resolved porosity, tracer distributions and diffusion coefficients in porous media using MRI measurements and numerical simulations

This work is focused on measuring the concentration distribution of a conservative tracer in a homogeneous synthetic porous material and in heterogeneous natural sandstone using MRI techniques, and on the use of spatially resolved porosity data to define spatially variable diffusion coefficients in heterogeneous media. The measurements are made by employing SPRITE, a fast MRI method that yields quantitative, spatially-resolved tracer concentrations in porous media. Diffusion experiments involving the migration of H(2)O into D(2)O-saturated porous media are conducted. One-dimensional spatial distributions of H(2)O-tracer concentrations acquired from experiments with the homogeneous synthetic calcium silicate are fitted with the one-dimensional analytical solution of Fick's second law to confirm that the experimental method provides results that are consistent with expectations for Fickian diffusion in porous media. The MRI-measured concentration profiles match well with the solution for Fick's second law and provide a pore-water diffusion coefficient of 1.75×10(-9)m(2)s(-1). The experimental approach was then extended to evaluate diffusion in a heterogeneous natural sandstone in three dimensions. The relatively high hydraulic conductivity of the sandstone, and the contrast in fluid density between the H(2)O tracer and the D(2)O pore fluid, lead to solute transport by a combination of diffusion and density-driven advection. The MRI measurements of spatially distributed tracer concentration, combined with numerical simulations allow for the identification of the respective influences of advection and diffusion. The experimental data are interpreted with the aid of MIN3P-D - a multicomponent reactive transport code that includes the coupled processes of diffusion and density-driven advection. The model defines local diffusion coefficients as a function of spatially resolved porosity measurements. The D(e) values calculated for the heterogeneous sandstone and used to simulate diffusive and advective transport range from 5.4×10(-12) to 1.0×10(-10)m(2)s(-1). These methods have broad applicability to studies of contaminant migration in geological materials.     

Evaluation of metal contamination in sediments from north of Morocco: geochemical and statistical approaches

Concentrations of Fe, Mn, Cr, Cu, Ni, Pb, Zn, Cd and Hg were evaluated in surface sediments of two rivers from north of Morocco, known as Souani and Mghogha rivers. Significantly higher concentrations in mg kg^???1 dry weight (dw) of Mn (747.6 vs. 392.9), Cr (86.4 vs. 56.3), Zn (299.5 vs. 138.5) were found in sediment samples from Mghogha when compared with Souani river. Average concentrations of Cd and Hg in several sediment samples from both rivers were above the effect range median that predicts toxic effects to aquatic organisms. The calculation of enrichment factors showed that Mn, Cr, Cu and Ni were depleted, whereas Pb and Hg were enriched. The results of geoaccumulation index revealed that sediments of both rivers were unpolluted with most of the metals and moderately contaminated with Fe and Hg. Some of elevated concentrations of Hg, principally in Mghogha River, were due to anthropogenic sources including the direct discharges of industrial zone.